Currant Wine No. 3

  1. To every pailful of currants, on the stem, put one pailful of water; mash and strain. To each gallon of the mixture of juice and water add three and one-quarter pounds of sugar. Mix well and put into your cask, which should be placed in the cellar, on the tilt, that it may be racked off in October, without stirring up the sediment. Two bushels of currants will make one barrel of wine. Four gallons of the mixture of juice and water will, after thirteen pounds of sugar are added, make five gallons of wine. The barrel should be filled within three inches of the bung, which must be made air tight by placing wet clay over it after it is driven in.
  2. Pick your currants when ripe on a fair day, crush them well, and to every gallon of juice add two gallons of water and three pounds of sugar; if you wish it sweeter, add another one-half pound of sugar. Mix all together in some large vessel, then dip out into earthen jars. Let it stand to ferment in some cool place, skimming it every other morning. In about ten days it will be ready to strain off; bottle and seal, or put in a cask and cork tight. The longer you keep it the better it will be.

Check Also

Pre-Pasteur Wine Recipes

How to Make Lemon Wine

Take six large lemons, pare off the rind, and squeeze the juice; steep the rind …

Leave a Reply