Black as the darkest night, rich as the most decadent dessert, Terminator is for the true stout lover. This is a full bodied and flavor packed ale which draws it’s robust complexity from kiln-baked specialty grains. Look for a wide array of toasted, chocolate, nutty and coffee-like flavors in every pint!
This recipe was made famous by the McMenamins chain of brewpubs around the Portland area. I brewed this recipe many times using my RIMS system and it came out exactly like their pub version.
This recipe makes 5 gallons.
|OG: 1.066 FG: 1.033 |
Primary Ferment: 2 to 3 days, as soon as the activity drops
Secondary Ferment: 3 weeks
Single step, upward infusion mash with strike temp at 157 degrees.
The above is the exact directions that I received from the brewmaster at the brewery. Of course the ingredients were in percentages. I have broken them down to 5 gallon bach amounts above.
The simplified instructions are;
Mash keeping the tempature as close to 157 degrees as possible. I used a RIMS system with a PID tempature controller that kept it within one degree but not everyone has a RIMS. So just do your best to keep it at 157 for 90 minutes.
Add the Cascade hops 1/2 oz when it reaches a boil and another 1/2 oz one hour later. I used pellet hops. If you use whole leaf, you will need to use more. This is not an overly hoppy recipe so be careful and don’t over do it.
Add 1 tsp Irish Moss 15 minutes before the end of the boil. Drop to 69 degrees as quickly as possible after the boil and pitch the yeast.
Optionally, you can add 3/4 pound of oatmeal flakes to the mash to add some sweetness. The recipe turns out great either way.
I don’t bottle, I keg it and charge it with beergass Co2/Nitrogen at 30psi but normal carbonation works great too.
par M. L. Pasteur, 1868 Mais quel est donc l’établissement où les laboratoires sont à …